Brugg Lifting

Elevator ropes from Brugg Lifting. Accessories.

As a system provider we offer rope end connections, damping systems and further accessories for all elevator ropes.

Brugg is a specialist in the development and production of clamp threads. Due to our expertise and experience we can also offer customized end connections.


End terminations

APAG Threaded swaged sockets  

Best connections

APAG-end connections are TÜV tested and approved according to TRA / EN81.

APAG-end connections transmits 80% of minimal breaking load of traction rope.


Advantages

  • simple and safe mounting
  • shortened installation time, since no mounting of end connections by customers
  • no special tools required
  • the compact type enables a very tight arrangement of ropes and parallel running ropes
  • simple securing against rotation
  • position of pilot hole for rope end
  • quiet operation because there are no individual parts

   

Eyelet bolt with swaged thimble

Product data

  • eyelet bolt steel St 37, zinc-plated

Advantages

  • simple and safe mounting
  • no special tools required
  • simple securing against twisting

Wedge socket symmetrical (EN 13411-7) with eyelet bolt (DIN 444) 

Product data

  • wedge socket welded, steel zinc-plated
  • incl. wedge, bolt and safety pins pre-assembled
  • wedge socket transmits 80% of minimal breaking load of traction- or governor rope
  • eylet bolt welded, steel zinc-plated
  • in connection with the wedge socket the eyelet bolt transmits 80% of the minimal breaking load of the elevator rope
  • for mounting and operation the explanations in appendix B of the norm EN 13411-7 are valid

Advantages

  • can be assembled safely and simply on-site
  • springs, buffers and other accessories can be mounted individually


   
Other sizes available upon request.
You will find the item numbers for all combination possibilities in the price list.
   
Other sizes available upon request.
You will find the item numbers for all combination possibilities in the price list.

Wedge socket asymmetrical (EN 13411-6) with eyelet bolt (DIN 444) 

Product data

  • wedge socket cast, steel zinc-plated
  • incl. wedge, bolt and security pins pre-assembled
  • eylet bolt welded, steel zinc-plated
  • in connection with the wedge socket the eyelet bolt transmits 80% of the minimal breaking load of the traction – or governor rope

Advantages

  • can be assembled safely and simply on-site
  • springs, buffers and other accessories can be mounted individually
  • for mounting and operation the explanations in appendix B of the norm EN 13411-6 are valid


   
Other sizes available upon request.
You will find the item numbers for all combination possibilities in the price list.
   
Other sizes available upon request.
You will find the item numbers for all combination possibilities in the price list.

Rope clamp (EN 13411-5) 

Product data

  • rope clamp
  • zinc coated
  • in case of the professional use, the rope clamps transmit 80% of the minimal breaking load of the traction – or governor rope
  • for mounting and operation the explanations of the norm EN 13411-5 are valid

Advantages

  • can be assembled safely and simply on-site

   
* Corresponds to the maximum nominal rope diameter. For interim sizes of the nominal rope diameter the next-largest clamp size is to be used.

Buffers

Spring 

Product data

  • steel spring, bright
  • zylindrical type
  • suitable for APAG, eyelet bolt, wedge socket symmetrical and asymmetrical

Advantages

  • improved riding comfort
  • according to the strength of the chosen spring or of the number of elastomer buffers (up to 3) the result can be influenced individually
   

Elastomer buffers for rope attachment  

Product data
  • polyurethane elastomer with cells
  • suitable for APAG, eyelet bolt, wedge socket symmetrical and asymmetrical
Advantages
  • excellent damping properties with a low headroom
  • long distance of spring deflection in case of small overall height
  • transverse elongation
  • also applicable on the counterweight side as rope length compensation
  • grease- and oilresistant
   

Door closing rope sets

TSS and SMZ for self-assembly  

The TSS - rope set consists of

  • 1 FLEX door closing rope, 3500 mm length, with one-sided pressed APAG - external thread to adjust the correct rope tension
  • 1 clamping ring to fasten a rope end at a fixed point
  • 1 rope clamp and 1 thimble to mount the loose rope end

One packaging unit contains 5 rope sets each.

   

The SMZ - rope set consists of

  • 1 thread for easy installation DO-IT-LINE to adjust the correct rope tension
  • 1 clamping ring to fasten a rope end at a fixed point
  • 1 rope clamp and thimble to mount a loose rope end

One packaging unit contains 5 rope sets each.

The SMZ – rope set does not contain a door closing rope.
This can be ordered separately.

Advantages

  • fast and simple installation
  • suitable for most elevator door-closing systems
  • reduces downtimes
  • complete set – all parts are included
  • not much warehousing required
   

Flex 6 x19S-WSC 1960 B sZ  

Description

  • 6 strands, regular lay right-hand
  • seale - construction, 19 wires / strand
  • nominal tensile grade 1960 N/mm2
  • zinc coated, basic-lubricated
  • steel core
  • no i-LINE
  • e-modul: 110.000 N/mm2
  • elastic elongation at 10 % of the minimal breaking load is approx. 0,138 % of traction rope length
  • remaining elongation is approx. 0,25 % of traction rope length

Recommended use

  • especially for door drives
  • due to very fine strands especially suitable for deflector sheaves
  • excellent service life with regard to high bending load

   

Accessories

RPM Rope performance measurement device  

Keep the tension under control
Only the even tension within an elevator rope set can guarantee a wear- and maintenance low operation and secures a high economic efficiency.

The RPM Rope performance measurement device makes it easier for you to check the rope tension during the installation, the inspection and the maintenance of elevators.


Advantages

  • fast, simple and precise determining of rope diameters and rope tensions within only one measuring process
  • comparing and measuring of rope tensions within a rope set
  • simple documentation, information request and comparing of the last 94 measuring results each by recording in device
  • high measuring accuracy of the rope tension of +/- 5% and of the diameter of +/- 1%
  • big measuring area: rope tension from 2 kN / 446 lbf up to 35 kN / 7800 lbf, rope diameter 8,0 - 22,0 mm or 5/16 - 7/8 in
  • free selection of measuring unit kN / mm and lbf / in by user
  • easy reading of measuring results due to illuminated display
  • simple operation due to big, sturdy operating elements
  • flexible use through grid-independent battery operation (1 x 9 V battery)
  • handy device: only 330 x 230 x 50 mm (12,9 x 9,1 x 2,0 in) in size and 2,6 kg (5,73 lb) in weight
  • device safety strap, operating instructions, stable transportation case and battery included in delivery
   

RLE Rope Load Equalizer  

Our Rope Load Equalizer (RLE) kit is an ideal solution for the exact, easy, quick and cost-effective load equalization with elevator ropes. RLE provides for a lower wear and thus for a longer service life.

RLE - Kit

  • Pump units
  • Hoses
  • 6 hydraulic cylinders with feet
  • Threaded bushes
  • Bag

Advantages

  • Reduces time and effort in load equalization
  • Reduces the total costs of maintenance
  • Reduces potential long-term costs of wear with ropes and machinery
  • Is robust and maintenance-free
 

GDC Grove Depth Comparator  

GDC Groove Depth Comparator
The GDC enables you to precisely measure and compare sheave groove variations. It serves to early detect worn-out drive sheaves and may thus help to increase the service life of ropes.

Advantages

  • Robust design in aluminum with anodized surface
  • Application in seconds
  • Weight of only 100 g
  • Applicable for diameters from 8 - 22 mm or 3/8 - 3/4 inch
  • Precise finish
 

RWG Rope Wear Gauge  

RWG Rope Wear Gauge
Within seconds, the precision gauge enables you to check, whether the minimum nominal diameter of the rope is below the target. If below limit, the rope must be replaced.

Advantages

  • Robust design in aluminum with anodized surface
  • Application in seconds
  • Weight of only 100 g
  • Applicable for diameters from 8 - 22 mm or 3/8 - 3/4 inch
  • Precise finish
 

Rope cutters - Pulling grip 

Rope cutters
  • for rope diameters between 12,0 - 16,0 mm
   

Hydraulic rope cutters
  • for rope diameters between 8,00 - 20,00 mm
   

Pulling grip
  • zinc coated, for installing elevator ropes
   

VT LUBE Lubricant 

VT-LUBE This rope care lubricant was especially developed for the relubrication of elevator ropes.

Advantages

  • excellent penetration quality causes optimum friction reduction in the rope
  • excellent creep quality enables even lubricant distribution on and in the rope
  • excellent corrosion protection
  • suitable for high rope speed through very good adhesive quality
  • neutral quality towards synthetic materials (no swelling of plastic parts)
   

Packaging

Packaging

When selecting the packaging, Brugg pays attention to the best transport protection possible. Our ropes are protected in the best possible way during the transport with special packaging materials against corrosion and mechanical damaging.

Brugg is committed to handle ressources with great care. That is why our ropes, whenever possible, are delivered on sturdy returnable reels and drums that can be reused.

A - Cross drums

  • capacity according to rope diameter
  • from 100 m (ø 16 mm) to 400 m (ø 6,5 mm)

B - Round reels

  • ø / width: 300 - 600 mm / 320 - 530 mm
  • Non-returnable packs from cardboard/wood

C - Colls

  • up to 50 m or 30 kg

D - Wooden reels XJ-wooden reels ø 100 x 65 cm

  • capacity according to rope diameter
  • from 1000 m HRS (ø 16 mm) or 1132 kg reel weight
  • up to 4100 m HRS (ø 8 mm) or 1118 kg reel weight

E - System deliveries on pallets

  • consisting of rope / end terminations  /  accessories  /  mounting material

F - System deliveries in sturdy cardboard box

  • L / B / H: 80 x 60 x 80 cm / 120 x 60 x 80 cm
 


FaLang translation system by Faboba
Array ( [geoplugin_request] => 54.81.79.128 [geoplugin_status] => 200 [geoplugin_credit] => Some of the returned data includes GeoLite data created by MaxMind, available from http://www.maxmind.com. [geoplugin_city] => Ashburn [geoplugin_region] => VA [geoplugin_areaCode] => 703 [geoplugin_dmaCode] => 511 [geoplugin_countryCode] => US [geoplugin_countryName] => United States [geoplugin_continentCode] => NA [geoplugin_latitude] => 39.0481 [geoplugin_longitude] => -77.4728 [geoplugin_regionCode] => VA [geoplugin_regionName] => Virginia [geoplugin_currencyCode] => USD [geoplugin_currencySymbol] => $ [geoplugin_currencySymbol_UTF8] => $ [geoplugin_currencyConverter] => 1 ) United States & Canada