Elevator ropes from Brugg Lifting. Highest quality.
Our ropes are constructed using advanced production techniques, implementing the most stringent test and control procedures in order to meet the most demanding user specifications. This creates a line of products that offer very low diameter reductions, high breaking force, round cross sections, great ride quality, low stretch over the ropes lifetime. This in turn provides maximum rope life expectancy.
9x19S-PWRC 1570 U sZ (RRL)
HRS
|
Steel core rope, 9 strands, parallel lay
9x19S-PWRC 1570 U sZ (RRL)
|
|
|
≤ 425 m ≤ 1400 ft |
|
Technical data |
lifting height |
125.000 N/mm2 |
18,129 x106 psi |
0,104 % |
0,13 % |
≤ 425 m ≤ 1400 ft |
|
E-Module |
elastic elongation |
permanent elongation |
lifting height |
Technical data
|
For highest demands on breaking force, elongation and number of trips. Recommended for round grooves with an undercut angle of ≤ 85°. |
9x19S-PWRC 1370/1570/1770 U sZ (RRL)
DP9
|
Wire rope with polypropylene fiber core, 9 strands, parallel lay
9x19S-PWRC 1370/1570/1770 U sZ (RRL)
|
|
|
≤ 250 m ≤ 800 ft |
|
Technical data |
lifting height |
115.000 N/mm2 |
16,679 x106 psi |
0,112 % |
0,25 % |
≤ 250 m ≤ 800 ft |
|
E-Module |
elastic elongation |
permanent elongation |
lifting height |
Technical data
|
For high demands on breaking force, elongation and number of trips. Recommended for conical grooves and undercut round grooves. |
9x19S-IWRC 1570 U sZ (RRL)
SCX9
|
Steel core rope, 9 strands, separate lay
9x19S-IWRC 1570 U sZ (RRL)
|
|
|
≤ 325 m ≤ 1000 ft |
|
Technical data |
lifting height |
120.000 N/mm2 |
17,404 x106 psi |
0,108 % |
0,16 % |
≤ 325 m ≤ 1000 ft |
|
E-Module |
elastic elongation |
permanent elongation |
lifting height |
Technical data
|
For highest demands on breaking force, elongation and number of trips, also under difficult installation conditions. Recommended for round grooves with an undercut angle of ≤ 85°. |
9x19S-IWRC 1570 U sZ
MCX9
|
Steel Core Rope, 9 Strands, Parallel Lay
9x19S-IWRC 1570 U sZ
|
|
|
≤ 200 m ≤ 600 ft |
|
Technical data |
lifting height |
110.000 N/mm2 |
16 x106 psi |
0,120 % |
0,3 % |
≤ 200 m ≤ 650 ft |
|
E-Module |
elastic elongation |
permanent elongation |
lifting height |
Technical data
|
For high demands on breaking force, elongation and number of trips. Recommended for round grooves with an undercut angle of ≤ 85°. |
8x19S-NFC 1370/1570/1770 U sZ (RRL)
8x19
|
Wire rope with sisal fiber core, 8 strands
8x19S-NFC 1370/1570/1770 U sZ (RRL)
|
|
|
≤ 200 m ≤ 650 ft |
|
Technical data |
lifting height |
110.000 N/mm2 |
15,954 x106 psi |
0,122 % |
0,26 % |
≤ 200 m ≤ 650 ft |
|
E-Module |
elastic elongation |
permanent elongation |
lifting height |
Technical data
|
For high demands on elongation also under difficult installation conditions. Recommended for all groove shapes. |
6x19W-IWRC 1960 B sZ (RRL)
TSR
|
Steel core rope, 6 strands, zinc-plated, separate lay
6x19W-IWRC 1960 B sZ (RRL)
|
|
|
≤ 175 m ≤ 550 ft |
|
Technical data |
lifting height |
125.000 N/mm2 |
18,129 x106 psi |
0,104 % |
0,50 % |
≤ 175 m ≤ 550 ft |
|
E-Module |
elastic elongation |
permanent elongation |
lifting height |
Technical data
|
For high demands on small traction sheaves. Suitable for conical grooves of ≥ 45°. |